- Excavate 3-5 inches of the native soil; an optional weed barrier may be laid down on top of the excavated area.
- Fill in 2 inches with a crushed rock base, compacted to 90%-95% compaction, leaving about 3 inches before reaching the height of the concrete edge.
- Lay the bend-a- board around the entire perimeter. The bend-a- board is held in place with 12 inch composite stakes, five stakes per bend-a- board, held together by nailing or screwing the stake into the bend-a- board.
- Fill in all but 1/4 inch of the remaining area up to the top of the bend-a- board with crushed rock base.
- Lay 1/4 inch of decomposed granite on top of the crushed rock base and make sure to compact this evenly, this will be flush with the top of the bend-a- board.
- Around the outer perimeter, attach seam tape to the sub-base with 1 inch non-galvanized staples into the bend-a- board every foot.
- Glue the putting green onto the seam tape and secure with 1 inch, non-galvanized staples every 3-6 inches around the perimeter and every 3 square feet in the interior.
- Now that the grass is laid out flat and attached, evenly spread .5 – 1.5 pound(s) of infill per square foot, raking it into the thatch of the turf.
Premium Backyard Putting Green
agsturf
AGS Turf supplys highest quality artificial grass with factory direct price.
Our installation team Artificial Grass Solution became a licensed contractor in 2016 and ranked five-star on Yelp!
Leave a Reply